Double valve flow adjustment device for regulating gate opening and closing speeds. Compensates for the unbalanced loads created by wind and out of plumb installation of very light and medium heavy gates.
The open line electromechanical actuators range is designed for domestic applications. The choice of the actuators is bound up with the gate and pillars features. Sturdy and reliable, they are suitable for existing or new gates (1 or 2 leafs). Good quality leafs are required (rigid), the gate must operate smoothly when it’s moved manually.
B 310 and B 410 are electro-mechanical self-locking actuators with worm drives, suitable for the automation of side-hung gates or doors with either single or double wings.
They are available in the following versions:
B 310 electro-mechanical actuator, with a 310mm, travel, self-locking, for use on the right-hand gate wing (seen from within), for wings not exceeding 3m in length.
R 310 electro-mechanical actuator, with a 310mm, travel, unlocking version, for use on the left-hand gate wing (seen from within), for wings not exceeding 3m in length.
B 410 electro-mechanical actuator, with a 410mm travel, self-locking, for use on the right-hand gate wing (seen from within), for wings not exceeding 4m in length.
R 410 electro-mechanical actuator, with a 410mm, travel, unlocking, for use on the left-hand gate wing (seen from within), for wings not exceeding 4m in length.
Actuators B 310 & B 410
A: Electromechanical Actuators B: Electronic control unit C: Pluggable radio receiver D: Radio remote control E: Antenna F: Safety photocells G: Warning light H: Radio digicode I: Digicode protection case
For unlocking versions J: Automatic stopper K: Electrical lock
BR 615 is self-locking motor which does not require an electrical lock. The disengagement system is easily accessible without removing the cover. The BR 615 includes built-in opening and closing limit swithces that avoid gate efforts against the ground stoppers; which typically designed for light gate.
Electro electro-reducers with articulated arms for wing gates. Non-reversing electro-mechanical actuators with articulated arm for swinging gates (left or right) – max. Length 2.5 m. and max. Weight 250 Kg. Available with 220 or 12 Volts. Very silent. Operating in very diverse climatic conditions. Easy release. Montable on narrow pillars (min.170 mm).
Intensive use up to 800 Kg, residential use up to 1200 kg.
AT 80 is silent and highly-functional, whatever the temperature: from -20° to +70°C, thanks to the oil bath gear motor, with irreversible reduction unit eliminating the need for additional locking systems.
Auto-reverse safety is ensured by an adjustable oil bath clutch which reduces the trust force of the gate as it moves if it meets an obstacle.
GR 6 RANGE– Irreversible electric gear motors, for opening domestic gates weighing up to 600 Kg, with various current supply possibilities; very silent, operating in very diverse climatic conditions. Available with or without incorporated programmer. Upper cover available in various colours.
This is so called the ‘classic line&rsq of products. The CL 610 and 1010 is suggested for domestic and small collective applications. The motors dimension allows physical applications to take place in small or reduced areas. It is suggested that a good quality gate be used, one that is rigid and operates smoothly in mechanical mode.
Reduction gear operators with magnetic limit switches and with⁄without built in electronic control unit
Slowing down system on opening and closing operations
CL 610 400Kg max gate weight
CL 610 40 Cycles per day
CL 1010 800Kg max gate weight
CL 1010 – Up to 250 cycles⁄day without built in electronic control unit
Manual disengage in case of emergency
Accessories can be added
CL 610 and 1010
A Reduction gear motor B Built in electronic control unit C Pluggable radio receiver D Radio remote control E Radio antenna F Rack G Safety photocells H Key switch I Warning light
CL 1510 ⁄ 2000 If you are looking for a larger solution to your automatic gate opening problems, then the CL 1510 and CL 2000 could be the right solution for you. Designed to be used for industrial applications, the CL 1510 and 2000 can operate up to 450 cycles ⁄ day. It can be used on existing or new gates, with ease and reliability. If you would like that extra bit of power and operating ease, the CL 1510 and 2000 models are for you.